Product

  • TNW-403 Screw Press Sludge Dewatering Machine
  • TNW-403 Screw Press Sludge Dewatering Machine
TNW-403 Screw Press Sludge Dewatering Machine TNW-403 Screw Press Sludge Dewatering Machine

TNW-403 Screw Press Sludge Dewatering Machine

  • Model : TNW-403
  • Capacity : 25.5m³/h
  • INQUIRY

screw press sludge dewatering machine is an advanced sludge dewatering equipment. The product is widely used in papermaking, printing and dyeing, textile, food processing, beverage, municipal, sewage treatment plant, livestock wastewater treatment, Slaughter wastewater treatmentand other industries of wastewater treatment.

PRODUCT STRUCTURE:

Screw Press is structured with a filter element that consists of two types of Rings: a Fixed Ring and a Moving Ring; and a screw that thrusts the filter element and transfers and pressurizes the sludge.

Screw press sludge dewatering machine main graph

WORKING PRINCIPLE:

The gaps between the Rings and the screw pitch are designed to gradually get narrower towards the direction of sludge cake outlet and the inner pressure of the filter element increases due to the volume compression effect, which thickens and dewaters the sludge.

Screw press sludge dewatering machine principle

PRODUCT ADVANTAGES:

1.Treatment of low concentration sludge

It is recommended that the sludge concentration be between 2000mg / L and 50000mg / L

The screw type sludge dewatering machine configurates exclusive spiral plate for pre-concentration and better for dealing with low concentration sludge.To improve the shortcomings of gravity type in order to realize efficient concentration of sludge.

Floucculation and concentration operating together,make dewatering easy.Optimize concentration of original sludge for dewatering with intelligent control valve.

2.Self cleaning, no blocking

Movable and fixed ring instead of filter cloth, self-cleaning, no blockage, easy to treat oily sludge

Fixed plate substituted filter, self cleaning,no clogging, easy treatment of oily sludge.There is an automatic cleaning nozzle above the screw shaft, which can be set by PLC and equipped with a high-pressure water gun.

3.Low noise, low energy consumption

Energy saving and emission reduction to reduce noise pollution.

The screw type sludge dewatering machine depends on the volume pressure dehydration, dispensing with drums and other large-sized devices so as to realize a low operation speed, which is only 2-4 revolutions per minute.

155151E19-5.jpg

PRODUCT PARAMETERS:

Screw press sludge dewatering machine specifications

Screw press sludge dewatering machine parameters


 

Note: You can write to us or leave a message at any time to get technical support or solutions.

Email: info@tnwcn.com

Feedback: Click here